Designed Criteria

The Aktif Dome is one of the Aktif Aluminium Sdn Bhd (AASB) high quality product that evolved from extensive R&D, design and vast technical experience.

Aktif Dome is designed and fabricated from lightweight, durable with provided strength and stability of Aluminium structure and sheet cladding.

The mesh Aluminium structure is formed by a number of interlocking segments which is providing an exceptionally strong dome structure.

Design of the Aktif Dome shall comply with all Government Codes and Regulations, Malaysian Uniform Building Bylaws, Safety Regulations and any other regulations applicable to the installation.

Where there is in existence of relevant Malaysian Standard, British Codes of Practice applicable to the design, execution or performance of the dome, finishes, tolerances, fixing to structure, sealants and application, then the recommendations and requirements shall be considered a minimum standard for the work described to be complied with.

The dome primary structure is analyzed as space frame system with uniform dead load, live/imposed load and wind load are taking into consideration.  Then, the sizing of the main structure, connecting plate, bolts and nuts, welding and anchoring bolts can be only detailed.

The dome shall be designed and to withstand a wind loading assumption of the wind speed equivalent to 30 meter per second ( 108 Km/Hr )

Design, fabricate and install each component part so that deflection normal to the wall plane at full loading will not exceed LJI75 of the clear span of the component part.  Calculation of such deflection shall be based upon the combination of maximum direct loading (Dead Load), Maximum wind pressure and wind suction.

Structural components especially that of the aluminium cladding system including members, gaskets, welds connection, adhesives and sealant shall be designed and fabricated with a safety factor not less than 1.5. Failure is defined as breakage, part disengagement or permanent distortion.

Aktif Dome is guaranteed for a period of Ten (10) years from the date of issuance of Completion Certificate against any defects which may occur on dome system.